Product Category
UT418 Subminiature Load Cell Tensile Compressive Force Sensor
Column Tension Compression Force Sensor
D 15.9mm*H 16.5mm
Capacity: 10,20,50,75,100,150kN
For customised ranges, accuracy, dimensions and other parameters, please contact us.
| Product FeaturesSL403 column tension compression force sensor adopts plane loading method, low height, small deformation and easy installation. It can carry out tension and compression two-way force measurement, anti-overload protection, and high dynamic response frequency. |
Technical Specifications
| Specification | Technical Indicators |
| Capacity | 10,20,50,75,100,150kN |
| Rated Output | 2.0±10%mV/V |
| Zero Balance | ±0.05%mV/V |
| Creep | ≤0.2%F.S. |
| Non-Linearity | ≤0.5%F.S. |
| Hysteresis | ≤0.5%F.S. |
| Repeatability | ≤0.1%F.S. |
| Input Impedance | 350±5Ω |
| Output Impedance | 350±5Ω |
| Temp. effect on output | 0.05%F.S./10℃ |
| Temp. effect on zero | 0.05%F.S./10℃ |
| Insulation Resistance | ≥5000MΩ/100V(DC) |
| Reconnended Excitation | 5~15V |
| Maximum Excitation | 20V |
| Conpensated Temp Range | -10~60℃ |
| Operating Temp Range | -20~80℃ |
| Safe Overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Cable Size | φ2X3000mm |
| Weight | 0.2kg |
| Material | Stainless steel |
Product Dimensions
Installation size
Load Direction
Wiring Diagram
Accurate measurement with matching display
The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and convertedto display numerical values or output signals to the upper computer, PLC, etc.
Request For Quote