Product Category
UT425 High Capacity Cylindrical Type Load Cell
Column Tension Compression Force Sensor
D 54mm*H 135mm（size optional）
Capacity: 50,100,200,500,1000,2000,3000,5000,10000,20000,50000kN
For customised ranges, accuracy, dimensions and other parameters, please contact us.
| Product FeaturesSL410 column tension compression force sensor adopts plane loading method, low height, small deformation and easy installation. It can carry out tension and compression two-way force measurement, anti-overload protection, and high dynamic response frequency. |
Technical Specifications
| Specification | Technique |
| Capacity | 50,100,200,500,1000,200 0,3000,5000,10000,20000 ,50000kN |
| Rated Output | 2.0±10%mV/V |
| Zero Balance | ±1%mV/V |
| Non-Linearity | 0.02%,0.05%,0.1,0.3%F.S. |
| Repeatability | 0.02%,0.05%,0.1,0.3%F.S. |
| Recommended Excitation | 5~12V |
| Maximum Excitation | 15V |
| Compensated Temp Range | -10~60℃ |
| Operating Temp Range | -30~70℃ |
| Safe Overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Cable Size | φ5.4X6000mm |
| Material | Alloy steel/stainless steel |
| Protection class | IP67 |
Product Dimensions
Installation size
Load Direction
Wiring Diagram
Accurate measurement with matching display
The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and convertedto display numerical values or output signals to the upper computer, PLC, etc.
Request For Quote