UT320 S Bending Load Cell
S Type Tension Compression Force Sensor
L 50.8mm*W 25.4mm*H 63.5mm
Capacity: 50,100,200,500,1000,2000,3000,5000kg
For customised ranges, accuracy, dimensions and other parameters, please contact us.
| Product FeaturesSL305 S type tension compression force sensor has an S-beam structure with resistance strain gauges affixed to alloy steel/stainless steel elastomer, waterproof, oil-proof and corrosion-resistant. It has good symmetry, industrial grade high accuracy, compact structure, easy to install and convenient to use. |
Technical Specifications
| Specification | Technique |
| Capacity | 50,100,200,500,1000, 2000, 3000, 5000kg |
| Rated Output | 2.0±0.25%mV/V |
| Zero Balance | ±0.01mV/V |
| Non-Linearity | ≤0.018%F.S. |
| Hysteresis | ≤0.018%F.S. |
| Repeatability | ≤0.024%F.S. |
| Input Impedance | 385±10Ω |
| Output Impedance | 350±5Ω |
| Insulation Resistance | ≥5000MΩ/100V(DC) |
| Recommended Excitation | 5~15V |
| Maximum Excitation | 20V |
| Compensated Temp Range | -10~40℃ |
| Operating Temp Range | -30~70℃ |
| Temp. effect on output | 0.014%F.S./10℃ |
| Temp. effect on zero | 0.017%F.S./10℃ |
| Safe Overload | 150% F.S. |
| Ultimate overload | 300% F.S. |
| Cable Size | φ5.4X3000mm |
| Weight | - |
| Material | Stainless steel/alloy steel |
Product Dimensions
Installation size
Load Direction
Wiring Diagram
Accurate measurement with matching display
The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and convertedto display numerical values or output signals to the upper computer, PLC, etc.
Up: No more
Next: UT316
Request For Quote