Product Category
UT317L Subminiature S Load Cell
S Type Tension Compression Force Sensor
L 16.5mm*W 6.6mm*H 19.1mm
Capacity: 200g/500g
For customised ranges, accuracy, dimensions and other parameters, please contact us.
| Product FeaturesSL302L S type tension compression force sensor is made of stainless steel, waterproof, oil-proof and corrosion-resistant. Rubber sealing protection treatment, good symmetry, industrial-grade high precision, small size, easy installation, and convenient use. |
Technical Specifications
| Specification | Technique |
| Capacity | 200,500g |
| Rated Output | 1.0/2.0±10%mV/V |
| Zero Balance | ±0.05mV/V |
| Creep | ≤0.05%F.S. |
| Non-Linearity | ≤0.05%F.S. |
| Hysteresis | ≤0.05%F.S. |
| Repeatability | ≤0.05%F.S. |
| Input Impedance | 400/350±5Ω |
| Output Impedance | 400/350±5Ω |
| Temp. effect on output | 0.05%F.S./10℃ |
| Temp. effect on zero | 0.05%F.S./10℃ |
| Insulation Resistance | ≥5000MΩ/100V(DC) |
| Recommended Excitation | 5~15V |
| Maximum Excitation | 20V |
| Compensated Temp Range | -10~60℃ |
| Operating Temp Range | -20~80℃ |
| Safe Overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Cable Size | φ2X3000mm |
| Weight | 0.1kg |
| Material | Stainless steel |
Product Dimensions
Installation size
Load Direction
Wiring Diagram
Accurate measurement with matching display
The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and convertedto display numerical values or output signals to the upper computer, PLC, etc.
Request For Quote