UT322 Alloy Steel S Beam Load Cell
S Type Tension Compression Force Sensor
L 50.8mm*W 16.5mm*H 63.5mm(size optional)
Capacity: 25,50,100,200,250,500kg;0.75,1,1.5,2,2.5,5,10t
For customised ranges, accuracy, dimensions and other parameters, please contact us.
| Product FeaturesSL305 S type tension compression force sensor has an S-beam structure with resistance strain gauges affixed to alloy steel/stainless steel elastomer, waterproof, oil-proof and corrosion-resistant. It has good symmetry, industrial grade high accuracy, compact structure, easy to install and convenient to use. |
Technical Specifications
| Specification | Technique |
| Capacity | 25,50,100,200,250,500kg /0.75,1,1.5,2,2.5,5,10t |
| Rated Output | 2.0/3.0±1%mV/V |
| Zero Balance | ±0.03mV/V |
| Creep | ≤0.024%F.S. |
| Non-Linearity | ≤0.03%F.S. |
| Hysteresis | ≤0.03%F.S. |
| Repeatability | ≤0.03%F.S. |
| Input Impedance | 385±10Ω |
| Output Impedance | 350±5Ω |
| Temp. effect on output | 0.05%F.S./10℃ |
| Temp. effect on zero | 0.05%F.S./10℃ |
| Insulation Resistance | ≥5000MΩ/100V(DC) |
| Recommended Excitation | 5~15V |
| Maximum Excitation | 20V |
| Compensated Temp Range | -10~40℃ |
| Operating Temp Range | -30~70℃ |
| Safe Overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Cable Size | φ5X3000mm |
| Weight | - |
| Material | Alloy steel |
Product Dimensions
Installation size
Load Direction
Wiring Diagram
Accurate measurement with matching display
The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and convertedto display numerical values or output signals to the upper computer, PLC, etc.
Request For Quote