Product Category
UT344 High Capacity S Type Load Cell
S Type Tension Compression Force Sensor
L 50.8mm*W 16.5mm*H 63.5mm(size optional)
Capacity: 25,50,100,200,250,500kg;0.75,1,1.5,2,2.5,5,10t
For customised ranges, accuracy, dimensions and other parameters, please contact us.
| Product FeaturesThe S type tension compression force sensor is made of alloy steel, which is waterproof, oil-proof and corrosion-resistant. Rubber sealing protection treatment, good symmetry, industrial grade high precision, compact structure, easy installation and convenient use. |
Technical Specifications
| Specification | Technique |
| Capacity | 50,100,200,300,500kg,1,2,3,5t |
| Rated Output | 2.0±1%mV/V |
| Zero Balance | ±2%mV/V |
| Creep | ≤0.01%F.S. |
| Non-Linearity | ≤0.02%F.S. |
| Hysteresis | ≤0.02%F.S. |
| Repeatability | ≤0.02%F.S. |
| Input Impedance | 381±4Ω |
| Output Impedance | 350±1Ω |
| Temp. effect on output | 0.02%F.S./10℃ |
| Temp. effect on zero | 0.02%F.S./10℃ |
| Insulation Resistance | ≥5000MΩ/100V(DC) |
| Recommended Excitation | 5~15V |
| Maximum Excitation | 20V |
| Compensated Temp Range | -10~40℃ |
| Operating Temp Range | -40~65℃ |
| Safe Overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Cable Size | 5m |
| Material | Alloy steel |
Product Dimensions
Installation size
Load Direction
Wiring Diagram
Accurate measurement with matching display
The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and convertedto display numerical values or output signals to the upper computer, PLC, etc.
Up: UT327
Next: No more
Request For Quote