Product Category
SL544 Stainless Steel Beam Load Cell
+
SL544
SL544 Stainless Steel Beam Load Cell

Bellow Beam Load Cell

D 42mm*L 123mm

Capacity: 5,10,20,50,75,100,200,300,500kg

Category: Single Point Load Cell

For customised ranges, accuracy, dimensions and other parameters, please contact us.

Request For Quote

SL544.JPG

Product Features

It has good mechanical properties, such as high strength, good impact toughness, high fatigue strength, and good machining and heat treatment properties. Good elastic properties, high elastic limit, small creep, and anti-oxidation and corrosion resistance.

Technical Specifications

SpecificationTechnique
Capacity5,10,20,50,100,200,500kg
Rated Output

2.0±0.02mV/V

Zero Balance±1%mV/V
Creep≤0.0166%F.S.
Non-Linearity≤0.02%F.S.
Hysteresis≤0.02%F.S.
Repeatability≤0.018%F.S.
Input Impedance387±4Ω
Output Impedance350±1Ω
Temp. effect on output0.008%F.S./10℃
Temp. effect on zero0.012%F.S./10℃
Insulation Resistance≥5000MΩ/100V(DC)
Recommended Excitation5~12V
Maximum Excitation15V
Compensated Temp Range-10~40℃
Operating Temp Range-20~60℃
Safe Overload150% F.S.
Ultimate Overload200% F.S.
Cable Sizeφ6X3m
MaterialStainless steel

Product Dimensions

Installation size

SL544-1.JPG

Load Direction

SL544-2.JPG

Wiring Diagram

SL544-3.JPG

Accurate measurement with matching display

The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and convertedto display numerical values or output signals to the upper computer, PLC, etc.

Back

Up: SL508

Next: No more

Request For Quote