Product Category
UT135B High precious tension compression pancake force sensor
+
UT135B High precious tension compression pancake force sensor
+
UT135B High precious tension compression pancake force sensor
+
UT135B
UT135B
UT135B
UT135B High precious tension compression pancake force sensor

Micro Compression Force Sensor

D 105mm*H 37mm（size optional）

Capacity: 0.1,0.2,1,2,3,5,10,15,20,30t

Category: Miniature Button Compression Force Sensor

For customised ranges, accuracy, dimensions and other parameters, please contact us.

Request For Quote

2.jpg

Product Features

Fibos pancake load cells are designed to provide unmatched accuracy and reliability for load measurement applications.
1. Pancake load cells are also pull-pressure load cells.
2. These load cells are typically made with alloy steel elastomeric elements.
Custom stainless steel load cells are also available.
3. The structure of the load cell is a spoke type, which is easy to install and stable.
4. The pancake load cell is laser welded and sealed, with high protection and reliability. Adaptable to harsh environments.


To further enhance its versatility, the Pancake Load Cell can be equipped with a built-in amplifier, offering high precision measurements. This integrated amplifier ensures accurate data acquisition and transmission, allowing for seamless integration with various systems and devices.

Technical Specifications

SpecificationTechnical Indicators
Capacity

0.1,0.2,1,2,3,5,10,15

,20,30t

Rated Output2.0±1%mV/V
Zero Balance±1%F.S
Creep≤0.05%F.S.
Non-Linearity≤0.05%F.S.
Hysteresis≤0.05%F.S.
Repeatability≤0.03%F.S.
Input Impedance780±20Ω
Output Impedance700±10Ω
Temp. effect on output0.02%F.S./10℃
Temp. effect on zero0.02%F.S./10℃
Insulation Resistance≥5000MΩ/100V(DC)
Recommended Excitation5~15V
Maximum Excitation20V
Compensated Temp Range-10~40℃
Operating Temp Range-10~70℃
Safe Overload150% F.S.
Ultimate overload200% F.S.
Cable Sizeφ6X5000mm

Product Dimensions

Installation size

1.jpg

Load Direction

2.jpg

Wiring Diagram

3.jpg

Accurate measurement with matching display

The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and convertedto display numerical values or output signals to the upper computer, PLC, etc.

Back

Up: UT119

Next: UT117

Request For Quote