Product Category
UT128A Flange Connections Force Transducer Cell
Micro Compression Force Sensor
D 40mm*H 20mm
Capacity: 10,20,50,100,200,500,1000kg
For customised ranges, accuracy, dimensions and other parameters, please contact us.
| Product FeaturesThe SL113 flat force sensor has a low profile, upper and lower flange construction, high accuracy, good strength, easy installation and good output symmetry. |
Technical Specifications
| Specification | Technical Indicators |
| Capacity | 10,20,50,100,200,500,1000kg |
| Rated Output | 1.5±10%mV/V |
| Zero Balance | ±2%mV/V |
| Creep | ≤0.05%F.S. |
| Non-Linearity | ≤0.2%F.S. |
| Hysteresis | ≤0.2%F.S. |
| Repeatability | ≤0.1%F.S. |
| Input Impedance | 780±20Ω |
| Output Impedance | 700±5Ω |
| Temp. effect on output | 0.05%F.S./10℃ |
| Temp. effect on zero | 0.05%F.S./10℃ |
| Insulation Resistance | ≥5000MΩ/100V(DC) |
| Recommended Excitation | 5~12V |
| Maximum Excitation | 15V |
| Compensated Temp Range | -10~60℃ |
| Operating Temp Range | -20~80℃ |
| Safe Overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Cable Size | φ3X3m |
| Material | Stainless steel |
Product Dimensions
Installation size
Load Direction
Wiring Diagram
Accurate measurement with matching display
The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and convertedto display numerical values or output signals to the upper computer, PLC, etc.
Request For Quote