Product Category
UT218 Tension Compression Inline Force Sensor
Screw Tension Compression Force Sensor
D 25.4mm*H 37mm*M5/M6
Capacity: 50,100,200,500,1000,2000N
For customised ranges, accuracy, dimensions and other parameters, please contact us.
| Product FeaturesSL203 screw type tension compression force sensor is made of all stainless steel, tension and pressure dual-purpose, has good symmetry, high precision, long life, simple structure, good frequency response characteristics. |
Technical Specifications
| Specification | Technique |
| Capacity | 50,100,200,500,1000,2 000,5000N |
| Rated Output | 2.0±10%mV/V |
| Zero Balance | ±0.05mV/V |
| Creep | ≤0.1%F.S. |
| Non-Linearity | ≤0.1%F.S. |
| Hysteresis | ≤0.1%F.S. |
| Repeatability | ≤0.1%F.S. |
| Input Impedance | 700±5Ω |
| Output Impedance | 700±5Ω |
| Temp. effect on output | 0.05%F.S./10℃ |
| Temp. effect on zero | 0.05%F.S./10℃ |
| Insulation Resistance | ≥5000MΩ/100V(DC) |
| Reconnended Excitation | 5~12V |
| Maximum Excitation | 15V |
| Conpensated Temp Range | -10~60℃ |
| Operating Temp Range | -20~80℃ |
| Safe Overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Cable Size | φ3X3000mm |
| Weight | 0.3kg |
| Material | Stainless steel |
Product Dimensions
Installation size
Load Direction
Wiring Diagram
Accurate measurement with matching display
The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and convertedto display numerical values or output signals to the upper computer, PLC, etc.
Request For Quote