Product Category
UT220 Stainless Steel Inline Force Sensor
Screw Tension Compression Force Sensor
D 34mm*H 52mm*M8
Capacity: 50,100,200,500,1000kg
For customised ranges, accuracy, dimensions and other parameters, please contact us.
| Product FeaturesSL205 screw-type tension compression force sensor is made of all stainless steel, dual-purpose for tension and pressure, with good symmetry, high precision, long life, simple structure, and good frequency response characteristics. |
Technical Specifications
| Specification | Technique |
| Capacity | 50,100,200,500,1000kg |
| Rated Output | 1.5±10%mV/V |
| Zero Balance | ±0.05mV/V |
| Creep | ≤0.1%F.S. |
| Non-Linearity | ≤0.2%F.S. |
| Hysteresis | ≤0.1%F.S. |
| Repeatability | ≤0.1%F.S. |
| Input Impedance | 780±10Ω |
| Output Impedance | 700±5Ω |
| Temp. effect on output | 0.05%F.S./10℃ |
| Temp. effect on zero | 0.05%F.S./10℃ |
| Insulation Resistance | ≥5000MΩ/100V(DC) |
| Recommended Excitation | 5~12V |
| Maximum Excitation | 15V |
| Compensated Temp Range | -10~60℃ |
| Operating Temp Range | -20~80℃ |
| Safe Overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Cable Size | φ4X3000mm |
| Weight | 0.3kg |
| Material | Stainless steel |
Product Dimensions
Installation size
Load Direction
Wiring Diagram
Accurate measurement with matching display
The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and convertedto display numerical values or output signals to the upper computer, PLC, etc.
Request For Quote